Canyon Torque CF 7.0 Mountain Bike – 18″ Frame / 12 speeds / 27.5″ wheel
18″ Medium Suspension Carbon Frame
12-speed (12×1) SRAM GX Rear mech and shifter
DT-Swiss E1900 27.5” wheel-set, front true and rear running a little off true
Full set of SRAM Code R Hydraulic disk brakes, nice and strong
180mm RockShox Lyrik forks, working well with compression adjust
RockShox Super Deluxe Rear shock – Fully working with firmness adjust and rebound
Maxxis Minnion/ Michelin Willd Enduro Mountain Tyres, good used condition
150mm Canyon Dropper post fitted in good working order
Canyon Bars/stem, SDG saddle, New Lock-on grips
**SOLD WITH NO PEDALS**
Positives
In Ready to ride order
Eye-catching all Black colour scheme
Quality Rockshox Rear Shock and fork
Truvativ Descendant single-speed hollo-tech style chainset
Smooth shifting, reaches all rear cogs
Wheelset runs close to straight, and has tight and smooth bearings
Great used condition – not many marks to be found. Just the odd light scuff/mark and some touched up chain slap. Great overall used condition with no structural damage whatsoever!
Fully working SRAM Brake set perform well and give very good stopping power
Headset and bottom bracket are smooth with no movement
12 speeds available
Negatives
The bike has no known faults!
What To Expect From a Used Bike
Buying a used bike is a great way to get an affordable ride with quality components!
A bike retailing at 5K new can have a retail tag of 2K five years on. With this saving though, there are a few things to consider.
I do my utmost to be honest with the bikes I sell and present them to you in a valeted condition, ready for their new owner. I try to sell bikes that have been checked over thoroughly, are working well and are ready to ride.
This though does not mean the bike has been mechanically reconditioned. This would cost in excess of £300.
Please bear in mind that manufacturers advise mountain bikes to have suspension serviced every 200 hours of riding and dropper posts every 400 hours. The brakes along with frame/bottom bracket/headset bearings are suggested to be replaced every 12 months. This does depend on the level of use though. If a bike has a few years on the clock please be mindful and realistic of the wear and tear the bike has. Without stripping a bike down to the frame I can only give my opinion on how components feel and how the bike operates. There may every now and then be the odd thing I miss.
Postage/Collection
Collection – Cash on collection please – Contact us to arrange a deposit/collection
Postage – at a cost of £29.99 or FREE WHEN PURCHASED DIRECT
